Revelador Cinestill DF96 B&N 1Ltr - Monobaño
Descripción
Una fantástica solución Monobaño que se envía en forma de polvo para un desarrollo doméstico sencillo y fácil.
Productos químicos suficiente para procesar más de 16 rollos de film en blanco y negro, esta solución simple paso que sólo necesitan medios uno tanque de procesamiento y un poco de agua para enjuagar la film al final.
Desarrollo de super-rápido de B & amp regular; W film: sólo 3 minutos a 27 grados C!
Empuje / tire ajustando la temperatura a 6 grados C por parada, totalmente archivable, sin olores y, en general, bastante indoloro.s.
Pasos de procesamiento:
- Prepare la solución hasta 1L con agua tibia a 27Cer
- Bañe su film expuesta en la solución - en la oscuridad
- Enjuague
- Colgar para secar
- ¡Eso es!
Nota: se aplican reglas de excepción para Bergger Pancro, Adox CMS, Rollei Retro 80S y JapanCameraHunter Streetpan. Para obtener información completa sobre las necesidades de film , consulte elHoja de datos de Cinestill
Especificación:
| Formar: | Polvo |
| Talla: | 1 litro |
| Capacidad: | 16 rollos de 35 mm o 12020) |
| Perfecto para: | Proceso simple de un paso |
Donde enviamos
Cuando nos compre la film de su cámara, podemos enviarla a todo el Reino Unido, Europa, EE. UU., Nueva Zelanda, Australia y Canadá, ¡más países planeados pronto! ¡Compre su Cinestill DF96 B & amp; W Film Developer Kit 1Ltr - Monobath hoy y vuelva a sumergirse en la diversión de la fotografía de film B & amp; W!y!
First time getting into developing my own film after years of putting it off. Worrying I’d get the temperature wrong and having lots chemicals was a little daunting, this stuff is so simple to use though and pretty much foolproof with the room temperature chemical, and looking at negatives that I got done professionally and they look pretty much similar to the ones I developed with this. Can’t really comment on if it’s good for professionals, but it’s definitely great for anyone starting out with film photography to get you used to working with chemicals and getting use to the the whole process (attached a few photos, the double exposures were with Kentmere Pan 100 and the flower is APX 100.
Used this with Ortho 80. At first negatives were underfixed. I did everything according to the booklet, not sure what was the exact problem. I find using it is very hit and miss, and the negatives came out very grainy. Will not use again, too unpredictable.
Just developed my first roll of HP5 with this and it's just so easy. I have absolutely no previous experience with film photography (let alone development) and the negatives came out great. I didn't even use a thermometer, I just ran the bottle under warm water for a minute or so and agitated intermittently for 4 minutes or so.
Highly recommended.
Using df96 monobath was so easy coupled with lab box. Hardest bit was reading the instructions - tho v easy to understand. Didn't have any distilled water so used bottled water for the mix and tap water for rinse. All looks ok - I've got something - and next step is to digitise and see just what!
I hadn't developed any film myself since college days (1988-ish) and a lot has changed since then. As I live in the middle of nowhere, with the nearest Post Office being about 5 miles away, and no local labs, I decided that home developing had to be the answer, and reading the reports about Df96 Monobath, I thought I'd give it a try. How simple could it be?...all you need do is follow the instructions, and you're there. If you can make a cup of tea, you can develop your own B&W film with Df96. Don't think twice, just go for it, you'll be glad you did!
