La mia carta

Vicino

Ilford Perceptol B&W Film Developer 1Ltr - Powder

Our Price: £6.50 GBP

100395

Descrizione

Uno sviluppatore per film a grana extra fine. Questa è la chimica da usare quando cerchi il MASSIMO dettaglio e definizione dai tuoi negativi, in particolare se stai per eseguire scansioni ad alta risoluzione o stampe di dimensioni significative, apprezzerai la maggiore qualità dell'immagine. Abbinalo a film a bassa e media velocità per i migliori risultati finali possibili.

Lo spediamo in polvere per una facile miscelazione a casa e una lunga durata di conservazione & gt; 3 annis)

I tre pacchetti inclusi contengono abbastanza sostanze chimiche per elaborare 4 rotoli di film in bianco e nero da 35 mm o 120 alla volta.e.

Per i tempi di sviluppo su più film, per favorecontrolla il MassiveDevChart qui

Specifica:

Modulo: Polvere
Taglia: 1L
Capacità: 4 rotoli 35mm o 1200)
Perfetto per: Massimi dettagli e risoluzione

 

Dove spediamo

Quando acquisti la tua film fotografica da noi, possiamo spedirla in tutto il Regno Unito, Europa, Stati Uniti, Nuova Zelanda, Australia e Canada, altri paesi in programma a breve! Quindi acquistare il vostro Ilford PERCEPTOL B & amp; W Film Developer Kit 1ltr oggi e tuffarsi di nuovo nel divertimento di B & amp; W fotografia film!y!

Customer Reviews

Based on 7 reviews
71%
(5)
29%
(2)
0%
(0)
0%
(0)
0%
(0)
F
F.u.
Perfect for: Portraits, Landscapes
Sharing with the Film Community: Yes
Accreditation Handles: @come_armageddon
Great for fine grain

I love using this developer with FP4 @ISO 125, you get next to no grain and a really nice range of tones. I've used it a few times on higher ISO films when it has been the only developer that I've had and it is definitely suited for slower ISO, I found that higher ISO films just came out looking underwhelming and flat, difficult to get a punchy and dense negative at higher ISO (above 200) with this fine grain dev. Dropping a star because I just can't ever seem to get the number of films out of a stock batch that Ilford suggests I can, best to stick to one-shot mix.

J
J.H.
Perfect for: Portraits, Landscapes, Architecture, Studio work
Sharing with the Film Community: Yes
Accreditation Handles: Joe Horner
NIce results, but expensive if you keep to the capacity recommendations.

Bought this to compare with my usual ID11 and test the limits of resolution on a couple of my cameras.

First roll through was some Rollei RPX100 in an Exakta using Zeiss glass. In terms of grain and resolution, the results impressed me (see the crop of sheep on a hill) and the tonality is lovely.

But, is it worth the cost of the suggested 4 rolls per pack compared to 10 or more in ID11 and Microphen? If you're doing a LOT of stuff where you need that resolution and grain, possibly. If most of your stuff is happy with the (already excellent) results that other Ilford devs give, probably not.

I'll probably be pushing this mix as far as I can to see how conservative they've been, and I may well buy another to keep (unmixed) in case I ever need it. But not one I'm likely to keep as stock solution for the limited times I might need it.

N
N.
Perfect for: Great All-Rounder, Landscapes, Architecture, Creative/Abstract
Sharing with the Film Community: Yes
Fantastic results

Stupendous sharpness and fine grain , though at a cost of some film speed. Creates a fantastic range of tones with a slow film,

P
P.R.J.
Perfect for: Great All-Rounder, Portraits, Landscapes, Street Photography, Architecture, Creative/Abstract, Travel, Studio work
Blown away by the images created

I had not used this developer before and so wanrted to give it a good try out.
Firstly I developed Ilford HP5 12 rool film which I pushed to 3200 Ths needed 41 min with a dilution of 1: 3 the images were crisp clean and very grainy which was expected at this speed.
I then tried
Kentmere 400 developed with stock solution for 123 min
Ilford HP5 developed for 9 min at 24 c giving an as rating of 250 asa
Then Agfa APX 400 developed in a solution of 1:1 for 23 min
In all cases I was very pleased with the results and the detail that resulted from using this developer. All of these film are nominal rated at 400 asa however perceptol actually reduces this nominally to 320 asa but the results are great. A developer I will use again

a
a.s.
Perfect for: Great All-Rounder, Beginners, Landscapes, Street Photography, Architecture, Creative/Abstract
Fomapan Film

Okay, I have ordered both film and developer from Analogue Wonderland and on both occasions have been asked later to review the products ordered but did not, do not feel qualified to review them. Why ? I have returned to photography after quite a number of years without making any serious images. In the eighties my last camera was a beautiful little Linhof medium format that I wish I had now. I had begun to get to grips with using the zone system to expose the Ilford black and white film I used and had some prints shortlisted for a local arts exhibition ( but did not make the final selection). Then I bought a boat and the photography stopped.
Now retired I wanted to use my time to again to attempt to produce some good (mainly) black and white, predominantly landscape or abstract photographs. I started with a digital kit which was a good way back in but it wasn't long before I was drooling over some lovely old film cameras and finally decided I wanted to shoot 5x4. black and white film. Good old ebay threw up some cheap ( my budget is severely limited) large format cameras and I secured an old kodak 3 ,5x4 monorail (there is one in the science museum collection !) which is built like a tank and weighs like one too. I love it. But, it is not very practical for carrying around in a back -pack with an eighteen inch rail ( I have been unable to find a short rail) So a second hand Toyo from Japan is going to replace it. Currently I scan the negatives into my computer, a darkroom still undecided but a considerable probability
Anyway, the essence of what I am trying to say is I have yet to get to grips again with the nuances of exposure development and the final print given the amount of time away from a film camera and darkroom. I have only just got to grips with using a changing bag and loading the film slides. Furthermore the first time I shot some film I failed to pudh the slides all the way home and fogged the top of the image !
But, the Fomafilm does all I need it to do currently and I like the results. My perception is that it is a little more contrasty than Ilford film in the lower speeds but that may be as much to do with me as the material. I have used Ilfosol, ID11 and Perceptol and have been happy with all three but my eye and experience is not yet practiced enough to discern the different qualities of each. However, I have used Fomapan 100, 200 and have some 400 yet to try and have been very happy with the results. The one difference I did notice from film used in the past is that the Fomapan base is quite thin which requires slightly more nimble fingers to get it into the developing spiral.
I shall continue to use Fomapan and for a while stick to one developer so I can begin to try and evaluate. I find it is much harder to evaluate the development of my own skills if I constantly use different materials. Once I am happy (or happier) with my work I can then begin to explore the qualities other products offer but only if they are going to improve the final print.