Ilford Perceptol B&W Film Developer 1Ltr - Powder

I was looking for a developer that would help get the best out of Ilford Delta 100 Delta 400 and FP4+. Having used Perceptol at 1+1 and 1+3 I believe I have found what I've been looking for.
Industry reflections Delta 100
Crowded Marina Delta 100
Cove FP4+
Marina (lifeboat)FP4+
Boat and Bridge FP4+

an easy to mix and use developer. first class results.

Ultra fine grain in negatives. Perhaps a bit too fine? Certainly not needed for medium/slow films. Maybe 400 upwards.

I decided to try Perceptol at 1+3 for the first time the other day. I normally use it as stock solution. It seems to have tamed the highlights. And do I see extra sharpness? I think I do!

I bought this as I was looking for a low grain developer and Perceptol seemed to fit the bill.

I have to say that the results are very good, I developer a roll of Kentmere 400 and the grain was very gentle with medium contrast and good sharpness.

However, be aware that Perceptol can’t yield full speed of the film, so you need to overexpose. Also it takes significantly longer to develop in Perceptol than in other developers. 23 minutes for Kentmere 400 in a manual tank + fixer means you’re looking at about half an hour of total time.

Is it worth it? I think so. Whilst Kentmere 400 does not have a huge grain, it’s a fast film nevertheless and the results I got with Perceptol are very nice. Next time I will see how it works with a ISO 100 film.

Nice creamy grain. Not advised if you've underexposed your negatives though.

Excellent for pulling film or just box speed if you want that fine grain/sharpness.

Sorry for the dodgy smaple photo. Scanners don't exist for us here 😜. Me and Nan on a walk July 2022.

Perceptol is great. It produces the finest grain I've seen yet. Even on HP5 as seen in this picture. Sorry for the crease in the photo by the way!

Mum Nan and I commemorating the annual memorial of Jesus' death in March at our virtual Kingdom Hall.

I love using this developer with FP4 @ISO 125, you get next to no grain and a really nice range of tones. I've used it a few times on higher ISO films when it has been the only developer that I've had and it is definitely suited for slower ISO, I found that higher ISO films just came out looking underwhelming and flat, difficult to get a punchy and dense negative at higher ISO (above 200) with this fine grain dev. Dropping a star because I just can't ever seem to get the number of films out of a stock batch that Ilford suggests I can, best to stick to one-shot mix.

Bought this to compare with my usual ID11 and test the limits of resolution on a couple of my cameras.

First roll through was some Rollei RPX100 in an Exakta using Zeiss glass. In terms of grain and resolution, the results impressed me (see the crop of sheep on a hill) and the tonality is lovely.

But, is it worth the cost of the suggested 4 rolls per pack compared to 10 or more in ID11 and Microphen? If you're doing a LOT of stuff where you need that resolution and grain, possibly. If most of your stuff is happy with the (already excellent) results that other Ilford devs give, probably not.

I'll probably be pushing this mix as far as I can to see how conservative they've been, and I may well buy another to keep (unmixed) in case I ever need it. But not one I'm likely to keep as stock solution for the limited times I might need it.

Stupendous sharpness and fine grain , though at a cost of some film speed. Creates a fantastic range of tones with a slow film,

I had not used this developer before and so wanrted to give it a good try out.
Firstly I developed Ilford HP5 12 rool film which I pushed to 3200 Ths needed 41 min with a dilution of 1: 3 the images were crisp clean and very grainy which was expected at this speed.
I then tried
Kentmere 400 developed with stock solution for 123 min
Ilford HP5 developed for 9 min at 24 c giving an as rating of 250 asa
Then Agfa APX 400 developed in a solution of 1:1 for 23 min
In all cases I was very pleased with the results and the detail that resulted from using this developer. All of these film are nominal rated at 400 asa however perceptol actually reduces this nominally to 320 asa but the results are great. A developer I will use again

Okay, I have ordered both film and developer from Analogue Wonderland and on both occasions have been asked later to review the products ordered but did not, do not feel qualified to review them. Why ? I have returned to photography after quite a number of years without making any serious images. In the eighties my last camera was a beautiful little Linhof medium format that I wish I had now. I had begun to get to grips with using the zone system to expose the Ilford black and white film I used and had some prints shortlisted for a local arts exhibition ( but did not make the final selection). Then I bought a boat and the photography stopped.
Now retired I wanted to use my time to again to attempt to produce some good (mainly) black and white, predominantly landscape or abstract photographs. I started with a digital kit which was a good way back in but it wasn't long before I was drooling over some lovely old film cameras and finally decided I wanted to shoot 5x4. black and white film. Good old ebay threw up some cheap ( my budget is severely limited) large format cameras and I secured an old kodak 3 ,5x4 monorail (there is one in the science museum collection !) which is built like a tank and weighs like one too. I love it. But, it is not very practical for carrying around in a back -pack with an eighteen inch rail ( I have been unable to find a short rail) So a second hand Toyo from Japan is going to replace it. Currently I scan the negatives into my computer, a darkroom still undecided but a considerable probability
Anyway, the essence of what I am trying to say is I have yet to get to grips again with the nuances of exposure development and the final print given the amount of time away from a film camera and darkroom. I have only just got to grips with using a changing bag and loading the film slides. Furthermore the first time I shot some film I failed to pudh the slides all the way home and fogged the top of the image !
But, the Fomafilm does all I need it to do currently and I like the results. My perception is that it is a little more contrasty than Ilford film in the lower speeds but that may be as much to do with me as the material. I have used Ilfosol, ID11 and Perceptol and have been happy with all three but my eye and experience is not yet practiced enough to discern the different qualities of each. However, I have used Fomapan 100, 200 and have some 400 yet to try and have been very happy with the results. The one difference I did notice from film used in the past is that the Fomapan base is quite thin which requires slightly more nimble fingers to get it into the developing spiral.
I shall continue to use Fomapan and for a while stick to one developer so I can begin to try and evaluate. I find it is much harder to evaluate the development of my own skills if I constantly use different materials. Once I am happy (or happier) with my work I can then begin to explore the qualities other products offer but only if they are going to improve the final print.

After my first attempts at processing Kodak Double-X 16mm film came out a little grainy, I tried Perceptol which worked a treat, giving a fine-grained result even with 10x14 negatives. Only problem is that it is difficult to find appropriate developing guidance for obscure films like Double-X. I ended up doubling time given for Microphen, which seemed to be in the ball-park.

I have used this On very fast and grainy film, it help reduce the brain to some degree, but don't expect miracles. I like that it comes in powder. I am infrequently developing at home. This suits that type of photography development, as I can mix
a batch when required, without wasting unused chemical.

I have to use up some Rodinal liquid first so it's great that, in powder form, the Perceptol will be ready for my next roll of FP4.
Looking forward to checking its promise of extra fine grain!